1 The gateway is not included in the purchase of the smart button.
2 The T3C Smart Button only works with the EZVIZ Sensor Kit and must be connected to the A3 Home Gateway. Currently, the button is only compatible with the T1C PIR Sensor and T2C Open/Close Sensor. Other compatible sensors will be launched in the near future.
3 The button can only be used at home with your EZVIZ Home Gateway to ensure steady connectivity. Once it’s disconnected from the Gateway, it will no longer work as an operating controller.
4 Data from EZVIZ lab test results, based on the usage of 15 clicks per day. May vary due to environmental factors.
T3C Smart Button
|Operation Conditions||-10 °C to 55 °C ( 14 °F to 131 °F ), humidity 95% or less (non-condensing)|
|Dimensions||Φ 40.6 × 12.3mm (Φ 1.6 × 0.5 inch)|
|Package Size||92 × 52 × 93 mm (3.6 × 2.0 × 3.7 inch)|
|Weight||68 g (2.4 oz) with package|
|Single Click||< 2 s|
|Double Click||Interval time < 0.5 s|
|Long Press||≥ 2 s|
|Modes||Arm/Disarm Mode, Emergency Button Mode|
|Low Battery Reminder||Supports|
|Installation Method||Place anywhere; adhesive back for peel-and-stick installation|
|Battery Type||Cell battery CR2032|
|Battery Life||Up to 2 years (Based on the usage of 15 clicks per day)|
|Communication Distance||< 200 m (Tested in open environment)|
|In the box|
|In the box||– T3C Smart Button|
|– Doubled-sided Tape|
|– Regulatory Information|
|– Quick Start Guide|
|Certifications||CE / RoHS / REACH / WEEE / UKCA|